edutaya.blogg.se - Ubiquiti air control 2

For example if the Web Server port is configured as 8080:.Did you configure a non-standard port for the services?.Is there a firewall between you and the unreachable device?.ATTENTION:If there is no cable running to the Management Port and In-Band Management is disabled, there will be no way to gain access to the device without factory resetting or running a cable to the Management Port. If you are using In-Band Management, make sure to leave In-Band Management enabled during the initial configuration.If you plan to use Out-of-Band Management, you will need a cable plugged into the Management Port of each airFiber.Management frames will not traverse the wireless link. The Management Port is not bridged to the Data interface.If you are using the Management port, make sure that the airFiber is configured with the correct subnet for the interface the Management Port is plugged into.In-Band Management versus Out-of-Band Management (airFiber devices) Try to access the Management Interface through the default VLAN.Ensure that you are correctly tagging your packets en route to the inaccessible device.Try to connect through the other interface.

Was Block Management Access enabled for the interface you are trying to reach the device through?.

Remote Management Access or Management VLAN Enabled

Ensure that the Apply button is clicked to commit saved changes to the running configuration.

Be sure to click the Change button before switching tabs in the UI in order to save configurations.

Is the inaccessible device an airMAX M unit? If yes, check these two additional points:.

Try to reach the device through the default IP address (192.168.1.20).

Please check each of the following items to identify and fix the issue: Configuration Was Not Applied This article guides the reader through the most common issues that can cause users to lose access to the manage their ISP Wireless devices.